Visit our Showroom to avail upto 20% discounts*     Call:   088700 06001

Do you know? How to Clean Ceramic or Porcelain Tile Floors?

How to Clean Tile Floors

Tiles cleaning are one of the most tensions for all of us. But if you take care of them properly then this can lasts long. Tiles are fairly low in maintenance compared to some other types of flooring.

Now-a-days there is lot of cleaning products are available in market to cleaning the floor. All you need to keep the floor clean and shining is warm water, a bit of soap or cleaning product, and a rag.

How Often to Clean Tile Floors

A tile floor should be “dry cleaned,” or swept or vacuumed, at least twice a week to get rid of the gritty debris that can dull the finish of the tile floor. Wet clean, or mop, the tile floor in the kitchen every two weeks and in the bathroom once a week. Spot-clean the grout once every two to three months.

What You’ll Need:

Equipment / Tools:

  • Broom and dustpan or vacuum
  • Rag or chamois mop
  • Bucket
  • Dry cloth

Materials:

  • All-purpose cleaner or dish soap
  • Warm water

Instructions:

How to Clean Ceramic or Porcelain Tile Floors:

The most common tile flooring, ceramic, and porcelain are a cinch to maintain, though it’s often hard to see the buildup of grime under your feet. To clean ceramic or porcelain tiles, use nearly any type of cleaner, whether it’s all-purpose, dish soap, or simple white vinegar—tiles don’t scratch or lose their shine easily.

  1. Sweep or Vacuum the Tile:

Make sure you get into the corners, where dirt tends to pile up. A microfiber duster picks up dust and hair easily.

  • Combine the Cleaner With Warm Water:

Dip a rag or chamois mop—not a sponge mop—into the solution. Squeeze out the excess water so that it’s damp and not soaking.

  • Run the Mop Over the Floor in Even, Gentle Strokes:

Follow a pattern as you move through the room, so there’s not an inch of the floor that gets missed.

  • Change the Water Regularly:

As you rinse out the mop or rag, the water will naturally get cloudier. Dump the dirty water and refill regularly to avoid leaving a hazy film of grime on the tile. If you finish up and notice that haze, create a mixture of white vinegar and hot water and run a damp rag over the film to get rid of it.

  • Clean the Grout:

Spray the grout with a cleaner made specifically for grout, or mix up a bleach solution (using gloves, so you don’t get bleach on your bare hands). Let it sit for a few minutes, and then rinse it off.

  • Dry the Floor With a Clean Cloth:

If your tile is prone to forming water spots, dry it with a clean cloth immediately after mopping.

How to Clean Marble or Natural Stone Tile Floors:

Marble, slate, or granite tile floors can be cleaned in nearly the same manner as porcelain and ceramic tiles, but with a few caveats:

  • Use a soft-bristled broom when sweeping natural stone tile floors, as they scratch much more easily than ceramic and porcelain.
  • Make sure that you’re using the right type of cleaner for the floor: Slate and marble tiles can’t handle anything acidic, such as vinegar, while granite tile needs a pH-neutral, mild detergent to avoid discoloration.

How to Clean Vinyl or Linoleum Tile Floors:

Vinyl and linoleum floors are inexpensive alternatives to pricier stone or ceramic tiles, but the upkeep is just as important. Although a steam mop seems like an easy shortcut, vinyl and linoleum aren’t made to withstand the extreme heat and moisture.

  • Vinyl: After sweeping, mop with a manufacturer-recommended cleaning solution or a mixture of water and vinegar. Don’t use abrasive cleaners, which can scratch the flooring.
  • Linoleum: After sweeping, clean with a solution that’s meant for linoleum flooring or a mixture of borax and water. Every three to six months, apply a coat of wax and buff to maintain the floor’s shine.

Removing Stains from the Grout:

Grout, especially if it’s light in color, stains easily. If you can’t get rid of the stain with regular cleaning, combine baking soda and water to make a paste. Apply it to the stain and let it sit for a few hours—or even overnight—and then scrub out the stain with a nylon brush (or, in a pinch, an unused toothbrush).

Leave a Reply

Quick Navigation
X
×
×